Estco Enterprises distributes a number of Heyco-brand bushing types including: snap, thick panel snap, snub and shorty, universal and shorty, open/closed universal, open/closed, threaded and double insulated, straight-thru strain relief, lay-in and in-line strain relief, and right angle strain relief. Each bushing features flexible shutters that adjust to accommodate and support any shape from .125" to a maximum diameter of 2.470". The bushings also feature fingertip pressure that snap-locks each bushing into its mounting hole.

Acetek Manufacturing & Engineering builds a number of drill bushing types including drill jig, metric drill jig, and carbide. The company's bushings feature a double-chamfered head and a two-way undercut, which allows a bushing to sit flush on top of a jig. The bushing also have internally ground diameters and 45-degree leads for easy entry into a jig.

SKF offers composite dry sliding, FW, and flanged bushings constructed from one of several materials. Dry sliding bushings, made of B/E material, are suitable for rotational and oscillating movements where space is limited. No lubrication is required. SKF FW bushings are meant for rotational and linear movements under relatively heavy radial loads, especially where alternating, shock or oscillating loads occur.

Specialty Motions Inc. (SMI) offers self-aligning, non-self-aligning, and flange type bearings. The self-aligning bushings come in the standard TW Series and the open TW-OP Series, and provide three times the load capacity and up to 27x the normal life of conventional ball bushings. The non-self-aligning bearings are produced from a solid steel outer cylinder and either a steel-hardened, seemless ball retainer or an industrial strength resin retainer; it is available in the standard SW Series and the extra-wide SWW Series. Finally, the company offers flange type linear bearings in both standard and extra-wide.

Yillick provides all types of carbide bushings or bearings in any grade, shape, or size. Choices include tungsten carbide direct coolant bushings, tungsten carbide head press fit bushings, tungsten carbide headless bushings, tungsten carbide press fit bushings, and tungsten carbide slip-fixed renewable bushings.  The direct coolant bushings offer improved cooling and chip flushing during drilling, as well as longer drill life; head press fit bushings have a rim/collar at the top for extra loads and are designed for permanent installation.

United California Corporation manufactures many kinds of bushings, ranging from standard headless and head press fit bushings, to more specialized hex grip, ser-head, and 4-way split types. The company also continues to make its trademarked regular and corner Anchor bushings and Twisfit bushings.

Sequoia Brass & Copper custom-manufactures bushings and other metal parts in a variety of metal alloys. The company specializes in 101 OFE/OFHC copper, but also uses 110 copper, 145 tellurium copper, 230 red brass, 260 brass, 272 brass, 330 brass, 360 brass, 464 brass, and 6061 aluminum.