Grainger Industrial Supply offers approved Vendor and Dayton brand rubber mounted bearings. Bearings are made with 52100 steel, rubber grommet, and cast iron materials. Bore diameter ranges from 5/8" to 1", and temperature ranges from -20 to 200°F. Available products include: 1" bore rubber setscrew lock, and mounted ball rubber bearings with 5/8", 3/4", 1/2", and 1" bores.

MSC industrial Supply Co. offers rubber mounted HVAC unit bearings. Product options include: stamped pillow block 1-1/4S, 2 bolt flange units 7/8, stamped pillow block 1/2, spherical insert 1/2, and 2 bolt setscrew unit 1. The maximum outside diameter is 2.8480", and the maximum inside/bore diameter is 1 1/4". Bearings are made with stamped steel, rubber booting, and chrome carbon steel materials.

Armadillo NV, Inc. offers nitrile, neoprene, and Armaload DLW66/DLW66XP load bearing pads. Nitrile pads have a variety of applications, including: bridges, buildings, cranes, fans, foundry, marine, steel industry, scales, etc. Nitrile pad temperature ranges from -40C to +80C, and pads have a compressive strength of 12,000 psi. Neoprene pads are offered in grades soft, medium, and hard. Thicknesses available include: 3mm, 6mm, 20mm, and 25mm. Maximum working temperature is 115°C and the minimum working temperature is -20°C. Armaload DLW66 and DLW66XP pads fit between steel beams, girders, columns, bridges, roof beams, and substructures. They provide shock/vibration isolation.

Boca Bearing Company offers pressure roller bearings. Pressure roller bearings are coated with urethane rubber and fixed by special processing on the outer ring to keep rotation accuracy. Under the proper radial loading, the coefficient of friction and hardness of rubber are useful for handling paper for carrying mechanisms, guide bearings, and idle bearings. Pressure roller bearings are commonly used in desktop and industrial printers, ATMs, robotics, etc. Dimensions range from 3 x 10 x 4, up to 6 x 20 x 5.

Scougal Rubber offers elastomeric bearing pads. Pads are reliable, inexpensive, and maintenance-free, with a service life that typically exceeds that of the bridge superstructure itself. Bearings transfer vertical loads from the superstructure to the substructure, while allowing limited horizontal movement, as well as rotational movement of the supported members. Bearing pads are made with natural rubber, Neoprene, and steel materials. Elastomeric bearings can be designed to suit almost any application.

D.S. Brown offers VersiflexTM Elastomeric Bearing Assemblies. These assemblies are custom molded using neoprene or natural rubber and are categorized into three designs: non-reinforced, laminated, and sliding bearing assemblies. Non-reinforced bearing devices are best specified when the load, rotation, and horizontal deflection are minimal. Laminated designs contain vulcanize-bonded internal steel plates, which increases the vertical load bearing capacity and the amount of horizontal deflection which can be accommodated by the bearing device. Sliding design assemblies are constructed for applications where horizontal displacements exceed +/-2".

Fabreeka International offers fabric reinforced, elastomeric bearing pads. These pads are used to eliminate concrete spalling by compensating for construction irregularities such as rotation and non-parallel load bearing surfaces. Pads also prevent electrolytic action between dissimilar materials in construction. Pads can withstand compressive loads perpendicular to the plane of laminations of not less than 12,000 psi before breakdown. Pads are available in thicknesses ranging from 1/16" to 1", and the effective temperature range is -65°F to 200°F.

Con-Serv, Inc. offers shimmed and plain neoprene elastomeric bearing pads. Elastomeric bearing pads provide structural support for bridges, commercial buildings, industrial buildings, petrochemical plant, and power plant applications. Pads are AASHTO grade, and can be bonded with PTFE to use as the lower element in a side bearing. Plain and shimmed bearings are available in standard Shore A durometers of 50, 60, or 70. The maximum temperature at a neoprene bearing is 200°F.

VXB Ball Bearings offers rubber sealed bearings in a variety of sizes and configurations. VXB offers the 6200-2RS sealed ball bearing, which has an inner diameter of 10mm, an outer diameter of 30mm, and a width of 9mm. The bearing is made of chrome steel and has 2 rubber seals to protect the bearing from dust or any possible contamination. The 6200-2RS is made of rubber seals and chrome steel. Inner diameter is 10mm and the outer diameter is 30mm. Other bearings offered include: auto wheel, ceramic sealed, skate bearings, etc.

Duramax Marine offers water lubricated rubber bearings. These bearings contain precision designed, specially formulated nitrile rubber which is molded to fit the shaft in accordance with U.S. Navy Buships clearances. Applications include marine propulsion, rudder, and industrial pump applications. Bearings possess inherent vibration-dampening qualities and are non-polluting. Grit particles and other abrasives wash into grooves and are flushed away, protecting the shaft and prolonging bearing life.

Emerson-EPT offers Browning rubber grommeted ball bearings for the heating, ventilating, and air conditioning industries. Rubber grommeted bearings are available in the 100 series (light duty) from 1/2" to 1"shaft diameters in a stamped steel pillow block or as an insert unit. The rubber grommet is designed to adjust for misalignment, and the bearing insert units are designed to fit into HVAC web mount supports. The bearings are available with 120° set screws or eccentric locking. Bearings are factory-filled with lithium complex NLGI 2 grease and cannot be relubed. Ball bearing applications include: fans, blowers, heating equipment, exhaust fans, and exhaust ventilators.

Gardico offers bearing pads in layered fabric with nitrile, Neoprene, and natural rubber materials. Products come in roll, sheet, and shape configurations. Pads meet AASHTO, CAL-TRANS, and Mil-Spec standards.

Voss Engineering, Inc. offers elastomeric structural bearing pads. Bearings have been used in a variety of structures including parking decks, bridges, stadiums, and exhibit halls. Voss has some of the most complete technical information available including design software on structure bearings.

Seismic Energy Products offers elastomeric bearings. Elastomeric bearings uniformly transfer specified vertical loads to the support structure while allowing horizontal movement and rotation. They compensate for minor construction irregularities, are easy to install, are maintenance free, and last the life of the structure.

Newact, Inc. offers rubber bearings for the military, food processing, medical, aerospace, chemical plants, mining, and OEMs. Elastomer compounds include: Butyl, EPDM, Fluoro-Silicone, Viton, Neoprene, Nitrile, etc.