The Pacific Bearing Company offers self lubricating linear polymer bearings with a wide range of temperature tolerances. Pacific Bearing linear polymer bearings are resistant to corrosion and chemicals. Pacific Bearing sells a line of Compound E bearings made of PBT polymer matrix, powdered bronze and PTFE. All of the Pacific Bearing Compound E bearings are self lubricating (no oil needed), have high load capacity with minimal water absorption, and are maintenance free. A downloadable catalog is also available.  PBC Linear also offers Simplicity self lubricating bearings. Their self lubricating Simplicity line includes linear plane bearings, square bearings and pillow blocks.

National Precision Bearing offers self lubricating and pre-lubricated bearings. Their "NU Series" of self lubricating bearings are used where excessive friction is found. They have a high load capacity and can operate at -328 to 536 degrees F. The "NX Series" of pre-lubricated bearings are used during low friction applications and can also carry high load capacities. These bushings can operate for long periods with only a small amount of lubrication. Thrust washers, ball, spherical plain and needle roller bearings are also available.

PI Bearing Technologies is a producer of self lubricated bearings. Their "FS" self lubricated bearings come in metric and inch sleeve and flange bearings, and metric and inch thrust washers. Their temperature range is -328 to 536º F. PI's "FR" self lubricated bearings come in metric sleeve type for high speed applications involving various lubrication conditions. The temperature range is from -58 to 536º F. PI also offers high strength aluminum alloy thrust blocks, machinable aluminum alloy bushings designed for full oil film conditions, and self lubricated polymer bearings with a unique inner bronze structure for applications that require narrow oil clearance control.

RBC's Fiberglide self lubricating bearings come in many types, including journal type with coiled steel backing, journal type with thin walled steel backing, journal type with heavy walled steel backing, metric sized journal type with coiled steel backing, non- metallic journal liner type, thrust washers with steel backing, non-metallic thrust washers, thrust packs, and sealed journal bearings.

Oiles is a supplier of industrial bearings, including metallic and non-metallic self lubricated bearings. Oiles 500 Series metallic self lubricating bearings incorporate high quality copper alloy based metals with solid lubricant plugs for lubrication free service. The 500 series bearings provide extreme temperature limits and high load capacity performance. The 500 AB Series performs well under sea water. The 500 L Series uses lithium based grease in dry applications. Oiles non-metallic self lubricating bearings are made of high performance plastic material, available in flanged straight bore bushing and thrust washer styles, and offer a broad temperature range from low to high temperature. These bearing types use uniformly dispersed lubricants and are designed for applications where no lubrication is possible.

Spyraflo Delrin and Delrin-AF bearings are self-lubricating and self-aligning bearing products that come in self-clinching, press-fit and flange mount configurations. The AF Delrin bearing option has additional Teflon lubrication within the resin to further reduce static friction and increase bearing speed capability. Delrin bearing features include medium speed, light load, suitable for rotational, oscillatory and linear motion, lightweight, and made of FDA approved materials.

Metcar manufactures solid self lubricating bearings and self aligning bearing assemblies that are non-galling and exhibit high compressive strength. They have a temperature range from 1200 F to -450 F, dry or under water. Metcar's products solve severe service lubrication problems in tough environments, including water and sewage treatment facilities. Bearings and thrust washers can be made to your specifications. Metcar Grade M-400 is recommended for food processing applications. It is a non-porous, resin impregnated, carbon-graphite material with excellent self lubricating properties.

Radial Bearing Corporation provides self lubricating rod end and spherical bearings. They also offer self lubricating Teflon (PTFE) fabric liners designed to eliminate the need for grease or re-lubrication within a temperature range of -65 degrees to 300 degrees F. In applications involving high loading, high vibration, or high surface speeds, Radial Bearing Corp. can design product to meet your specifications.

Lubrite Technologies provides self lubricated bearings that do not require any extra lubrication. A Lubrite bearing system is made of the bearing substrate and the lubricant. The lubricants are dry, solid and permanent. Lubrite Technologies has the capacity to manufacture self lubricating bearings as large as 30,000 lbs. Lubrite bearings feature complete self lubrication, elimination of supplementary lubrication, high and low temperature operation, and choice of lubricant and bearing materials for hostile environments.

Accroseal features their Accrolon non-metallic self lubricating bearings that offer high continuous service temperature, self lubrication properties, are made of high performance materials, and can replace Babbitt, bronze and Gatke bearings. Applications include thrust washers, sleeve bearings, bushings, and pillow blocks. Industries served include waste water.

Maxton is Tri-Mack's line of high performance self lubricated bearing materials. Maxton compounds combine high temperature, high load, and high speed friction wear capabilities. These offer significant improvements over non-moldable bearing materials. Tri-Mack also offers their SLiP self lubricated Pin technology, a design and maufacturing process to help lower costs with improved performance.

Graphite offers bearings made of a self lubricating  material called GRAPHALLOY. Advantages include no grease or oil, high temperature operation of -450º to 1500º F (-240º to 800º C), no oil contamination, non-galling, and self lubrication. Applications include linear motion, mixers/agitators, and many more. GRAPHALLOY is a uniform, solid, self-lubricating bushing and bearing material. It is the solution to your bearing, bushing, thrust washer or pillow block design problems where oil, grease and plastics fail.

Tenmat manufactures self lubricating materials such as FEROGLIDE and FEROFORM. FEROGLIDE is a self lubricating bearing material that can endure high load and high temperature applications. It is best suited for conditions with low speed and high load. They are applied on plain journal bearings, thrust bearings and flanged bearings. FEROGLIDE bearings run dry but can also be used with other lubrication. PA7 journal bearings are offered in a series of coiled, large, thin walled and solid. PA3 thrust bearings are offered as metal backed or laminated. FEROFORM is applied on composite bearings that are resistant to wear, asbestos and other chemicals. The FEROFORM line offers a self lubricating grade called T814, characterized by long life and low friction in wet and dry conditions.

Reliable Bronze offers their R-Lube self lubricating powdered metal bearings. Self lubricating P/M bearings are made by blending powders and shaping the mixture to a required size. The bearing is oil impregnated for lubrication or corrosive resistance. Typical temperature range is from 10º F to 220º F. Reliable Bronze also offers an R-Lube sleeve bearing maintenance kit. Thrust bearings are also available.

Spadone Alfa produces a line of self lubricated bronze bearings with high load and high speed capabilities, and a medium to high temperature rating up to 600°F. These bearings are composed of a variety of bronze alloys such as aluminum bronze, bearing bronze and manganese bronze, and are used when standard lubrication is impractical. Spadone Alfa self lubricating bearings are also compatible with other lubricants, oil and grease.

HyComp manufactures three types of self lubricating bearing materials for industrial applications: WearComp, WearComp 200 and FibreComp. They also produce two aerospace grade materials: H310 and H320. WearComp is suited for low speed, high load and high impact conditions. It is a proprietary mix of high temperature polymer and 1" chopped carbon fiber. WearComp 200 is suited for medium speed, high load and high impact conditions. It is  a proprietary mix of high temperature polymer, 1" chopped carbon fiber and graphite. FibreComp is suited for high speed, medium load and low impact conditions. It is a proprietary mix of high temperature polymer, milled carbon fiber and graphite.

Saint Gobain offers RULON Composites that are ideal for non lubricated, high load applications. RULON Composites exhibit a high load capacity similar to bronze, powdered metal and steel. They provide long wear and an extended operating life without the costs associated with lubrication.

NingBo KaiCheng produces a variety of self lubricating bearings, as well as ball and roller bearings. They offer JDB solid lubricant inlaid bearings made of copper alloy with casting methods. Their DU self lubricating bearing has a steel board as its backing, a bronze inter layer, and a PTFE surface for wear resistance. The FB090 self lubricating bronze bearing is wrapped with a bronze strip made of high specific gravity. Spherical or lozenge shaped indents or oil grooves may be added on the surface. The DX boundary lubricated bearing has a steel packing with a bronze inner layer and POM surface for wear resistance. The FR bronze self lubricating bearing has phosphorous, bronze and meshed backing with PT. The FU sintered bearing with oil is sintered under high temperature, and oil is soaked into the metal under vacuum.

Jiashan Roncan produces composite self lubricating and metallic self lubricating bearings. Their line of composite bearings consists of 10 bearings and bushings: dry bearings, bronze based bushings, reciprocating motion bushings, stainless steel bushings, gear pump bearings, hydraulic bearings and marginal lubricated/lubricated bearings and bushings. The line of metallic self lubricating bearings consist of 16 bearings and bushings: higher load bronze bushings, solid lubricant embedded bushings with graphite, bronze bushings with graphite, bronze bushes, bimetal bushings/bearings with graphite, cast iron embedded bushes, steel bearing embedded bushings, material and bronze embedded bushings, bronze mesh with PTFE, bronze bushes, ball steel retainers, ball steel retainers, ball steel cages, ball retainers, and high tin and aluminum based bushings. The 26 different types of self lubricating bearings differ in properties to meet different requirements for load capacities, corrosion resistance and temperatures.

Oilite is the trademark name for Beemer Precision's line of self lubricating bearings. Oilite Non-Tox bearings are self lubricating, oil impregnated sintered bronze. Oilite Non-Tox M Series are a metric series of of the same bearings. Oilite Plus are self lubricating sintered bronze bearings that are impregnated with a higher temperature lubricant. Excelite-TX are self lubricated iron/copper bearings impregnated with an extreme pressure lubricant. Beemer also offers other oil impregnated self lubricated and custom bearings in non-standard sizes.