News

Waspmote-based Smart Parking platform provides information to city motorists searching for available parking spaces. Buried under parking spaces, robust sensors feature PVC casing and are rated IK10 for mechanical impact protection, IP67 for ingress protection, and operate for 5 yr before requiring battery replacement. Devices use radios at 2.4 GHz or 868/900 MHz for communications and can be programmed and upgraded over radio network without having to dig up parking spaces.

6C7375 is custom turntable bearing designed for media storage towers, retail displays and other smooth turning applications. Top piece is standard 6 in. lazy susan bearing, while bottom is custom designed 9 in. diameter base, allowing for tall displays. Device is designed for media storage towers to hold DVD's, CD's and other top-heavy displays that need to spin freely.

Flat Corner Signs, intended for interior and exterior building corner applications, come in standard sizes up to 1,000 mm wide and long and custom sizes are also available. Modular signs utilize attached floating profile that lets sign frames float a few inches from the wall. Smart Insert technology allows application of most any materials up to 3.2 mm thickness since inner channels are graded in a way that enables use of different material and thickness.

During dry ice blasting, high-density CO2 pellets are propelled through high-velocity air stream, making most contaminants brittle and causing them to contract and break away from surface. Propellant then whisks away contaminants. In combination with high-velocity air streams, MoleoMaster employs interchangeable nozzles to provide maximum aggression and flexibility. Dry ice blasting is non-abrasive, non-conductive, non-toxic, and compliant with EPA, USDA, and FDA guidelines.

Featuring slim design for applications where pallet loading takes place close to machine table, VERO-S NSR achieves pull-down forces up to 15 kN and transfers torque up to 1,600 Nm. Parts that do not transmit force are aluminum, and parts that do transmit force are hardened steel. Self-locking with form-fit clamping, module can be unlocked with pneumatic system pressure of 6 bar, without lubrified air. Opening, closing, and pallet presence are monitored via inductive proximity switches.

Suited for small projects of 5,000 software files or less, QuickAudit(TM) Service is performed by licensing experts using Protecode System 4(TM) automated scanning tools. As part of service, Protecode delivers executive audit report detailing all open source packages, licenses, and copyrights associated with software files in target portfolio. License obligation report, summarizing obligations associated with all licenses found in portfolio, is also provided.

Available in zinc-plated mild steel or stainless steel, JCS Hi-Grip Worm Drive Hose Clips are suited for domestic, automotive, and industrial applications, or corrosive environments. JCS Hi-Torque Hose Clamps, made of stainless steel, are designed for tough and wire-reinforced hoses. Units feature Lloyds Type Approval for marine, offshore, and industrial use. With stainless steel JCS Multi-Torque banding and connectors, users can produce instant hose clamps to any desired diameter.

Through Visa Strategy Manager, financial institutions can create and implement strategies for identifying and stopping fraudulent transactions in real-time at check-out. Algorithms enable users to target riskiest transactions with customized strategies and determine whether they should be approved, declined, or flagged for review. By building customized rules that are based on issuer's transactions, Visa Strategy Manager can target fraud patterns that are specific to issuer's portfolio.

Designed specifically to accommodate 10 x 38 mm Solar Protection Fuse (SPF) series fuses, Midget Holders are available in #3576 version for THM applications and #3574 version for SMT mounting,. Both feature durable UL 94V-0 nylon bodies with tin-plated, brass contacts, which provide low contact resistance and good durability. Optional Holder Cover (Catalog #3576C) is also offered.

Available in various sizes with bores ranging from .379-.50, wood and nylon split bearings promote accessibility when periodic maintenance, repairs, or replacement are needed on industrial machines with restricted access or complex and layered mechanisms. Bearings can be made of nylon or wood and are offered with standard and custom housings and mountings. These light-duty, miniature bearings, suited for humid, hygienic environments, have chemical-tolerant design.

Combining team of certification industry experts with certification-readiness tools tailored for needs of avionics industry, FAA/EASA Certification Solution provides comprehensive support, overseeing and guiding certification applicants through wide range of aviation standards. Proficient in commercial and military airworthiness, LCS addresses critical project requirements that relate to certification, including management, planning, staff training, development, verification, and production.

Suitable for rotating, oscillating, and linear movements, igubal® K-Series rod end bearings are available in clip version with different ball materials: 6 high-performance plastic blends as well as stainless steel. Balls come in iglide® L280 for applications with high wear rates, cost-effective iglide R, low-friction iglide J, iglide J4 with low moisture absorption, chemical- and high temperature-resistant iglide T500, and iglide UW for underwater applications.

As slotted cable holder with pressure grips, UCG-6BK mounts to panel using No. 6 or M3.5 screws. Product can accommodate up to 7 cable bundles, and cable holders can be removed to accommodate larger cable bundles. Featuring HDPE base (RMS-422) and TPE inserts (RMS-433), black grip is designed so that cables are pushed in by hand. Design also facilitates cable removal.

Available in both UL94 V-2 Nylon 6/6 and UL94 V-0 Nylon 6/6, Model SMLCBS offers 4 different standoff heights of 5/16, 3/8, 7/16, and ½ in. Support slides into pre-formed slot, leaving no protrusion under chassis. Reusable unit prevents rotation of circuit board and is removable by pressing locking tab.

Available in 44 models, Frelon®-lined Flanged Sleeve Bearings include BSLFLN-PF Series in inch sizes and BSLFLNM Series in metric sizes. Self-lubricating units fit shafts ranging from .1890-3.0015 in./6.028-50.062 mm diameter and are designed to replace sintered and plastic bearings. Overall diameter of flanges ranges from .4370-3.5000 in.

Shelf-edge channel systems are used to identify, describe, and price merchandise on shelves and may also be used for promotional signage. Offered in clear or white styrene plastic, there are 2 peel-and-stick pricing solutions: heavy duty C-channels measuring 1¼ x 48 in. or 3 x 48 in., and 1¼ x 48 in. Econo C-Channels for straight corner shelf edges. Label and sign channel holder snaps into 1¼ in. gondola metal shelving. Clear outer flap protects against dust and dirt.

SIGN FRAMES come in sizes from 3½ x 5 in. to 11 x 14 in. Frames combine with various components - stems, stem mounts, magnetic bases, flat bases - to create wide varitey of sign holder configurations: Flat Shovel Base, Center Stem Base, Center Base, Magnetic Stem Base, Under the Shelf Mount, Wall Mount, and more. Regardless of size, individual sign holder frames use same system components, and sign sizes/orientation can be changed in seconds.

Compatible with Apple®'s iPad®, Omni-Q Service Assurance solution provides troubleshooting and in-depth QoE analysis for all of telecom operator's subscriber voice and data activity. Operators, leveraging such information, can enhance customer experience both for subscribers and groups of subscribers on high-speed networks. Tablet-based portability ensures operators to connect at any time from any place to their customers and their service quality information.

Able to test and track quality of mobile apps across iPhone, iPad, and Android platforms, Gorilla Logic Continuous QA Cloud brings together automation toolset focused on QA professionals with zero-configuration, cloud-based, on-demand test execution and management platform. Quality as a Service (QaaS) offering, together with MonkeyTalk automated testing tool, allows customers to test their apps across dozens or hundreds of mobile devices and simulators.

Designed to protect life science materials, Accsense A1-08 automated wireless system monitors temperatures from -40 to +70°C with 0.1°C resolution, provides cloud-based data storage and real-time reporting, and can connect to 6 NTC thermistor inputs. Solution also serves as temperature alarm system, complete with email, pager, and phone alert capabilities. Along with user-set sampling rate from 30 sec to every 24 hr, datalogger offers 2 inputs for connection to digital sensors.